Send SMS
Contact Us

Electroplating Rectifiers

Thyristorised Control In Rectifier

Thyristorised Control In Rectifier

Why The Regulator Control Is Superior To Thyristorised Control In Rectifier
  1. In plating application, the regulator is better and technology is adopted in Germany and Europe because of as explained in advantage.
  2. Other manufacturers of rectifiers have shifted to thyristors because they do not have the technology of rolling carbon roller regulators.
  3. Manufacturers of electroplating power rectifiers claim that thyristor controlled rectifier has fewer losses than a regulator. They compare thyristor with sliding carbon type regulator. In our case, their claim is not true. We use vertical coil type rolling carbon regulator. The copper section is three times so the losses are almost 1/6 or 20%.
  4. In our regulator, the roller moves on both sides of the coil to give ± 440 V or ± 254 V output. We design the rectifier in 'Q' connection in which the regulator current is half the line current so losses are less and life is much more.

Starting CircuitryElectroplating Power Rectifiers are designed for 3 phase 50 Hz. AC input supply & are available for operations at any voltage between 380 and 440 volts, in India but can be designed for 60 Hz AC and any other voltage available. It is recommended that the input to the rectifier should be connected through a proper protective device, to provide positive protection to personal and the system, in the event of maintenance or in case a fault occurs. Also manufactures rectifier autotransformer.

Basic Circuit of Electroplating Rectifier

Basic Circuit of Electroplating Rectifier

We manufacture and exports the wide range of Basic Circuit of Electroplating Rectifier.

Salient Features:

Electroplating Rectifiers

Electroplating Rectifiers

Electroplating Rectifiers is an equipment that converts AC into DC supply. Power make Silicon Rectifiers are widely used in Electroplating, Anodizing, Hydrogenation, and all other electrochemical processes. These power rectifiers, anodizing rectifiers, and electroplating power rectifiers are tailor-made, covering a wide range from 200 Amps to 15000 Amps at different output DC voltage as per requirement.
Salient Features

DC Output Control

DC Output Control
  • DC Output Control
  • DC Output Control

The function of the variable DC Output Control is to control the voltage or current or its operating range by varying input voltage to the main transformer primary. The DC output voltage variation is achieved steplessly 0-100% by means of an On Load roller type power make voltage regulator.

Diode

Diode

Diode for electroplating rectifiers. We manufacture and exports the wide range of carbon roller assembly and diode for electroplating rectifiers, at the industrial rate.

Features:

Carbon Roller Assembly

Carbon Roller Assembly

Carbon Roller Assembly for electroplating rectifiers. We manufacture and exports the wide range of carbon roller assembly and diode for electroplating rectifiers, at the industrial rate.
X
Provide Us More Details
Purpose of Requirement:

Reselling End Use Raw Material

X

Looking for Electroplating Rectifiers ?

    country-ico

    We will contact you soon !

    P. K. Maheshwary

    (CEO)

    Power Engineers And Consultants (Regd.)

    Jamalpur Colony, Ludhiana, Punjab, India

    More Categories

    View All Categories »
    Send SMS
    Contact Us